Does the rain sensor work in the car as a weather station?

The rain sensor is a sensor that measures the amount of water that collects on the windshield. The microprocessor sends the information to the components, which in turn activate the wipers. Depending on how much water falls on the glass, it will clean at this rate. So the driver does not have to change the settings himself, the system will do it for him.

In the past, only luxury cars had a rain sensor. Currently, it is commonly installed in many automotive sectors. You do not need to refer to the manual to see if your car has a rain sensor. It is enough to find out if the characteristic housing is installed in the area of ​​\u200b\u200bthe rearview mirror. Its presence proves that wipers work automatically.

You might be tempted to say that a car’s rain sensor functions as a weather station. The high sensitivity of the sensors means that even the first drops are detected, even before the driver notices that the rain has started.

The sensors use LEDs. When water appears, the flow of light is restricted to them. This is a signal to the system that it is time to start the wipers. The difference in the intensity of the light waves causes the feathers to operate at different intensities. It will move sequentially when the rain is light, or run continuously when the driver encounters heavy rain.

There are always situations when the sensor has to work. It may happen that it reacts, for example, to a few single drops, de facto wiping the glass dry. If it’s dusty, we could theoretically scratch it. As a precaution, it is better to turn off the sensor if there is no rain.

The system is deactivated after changing from automatic to manual mode. This can be done using a special button or by shifting the spaces to a position other than the position indicated by the number “1”. Most often, choosing a different operating mode automatically turns off the automatic control, and therefore also the rain sensor.

***